The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Blaze69 · 11-22-2008, 08:57 PM

Great, looks like it is in the same place as the one for an older 350. My 69 blazer had it right about there. Is this the one for the gauge or ECM? Or are they one n the same. I'll go ahead and buy one in the morning and then try and throw it in on Monday or so.
One last thought on it though. For future reference, look back up a few posts where I was wondering about the closed/open mode. Does anyone know exactly how that works and how it may affect my situation? Hopefully if all goes well I will post up by midday on Monday, or probably Tuesday morn to check it while it's cold. Thanks for the info.

11-22-2008, 08:57 PM	#14
Blaze69 Registered User Join Date: Apr 2001 Location: Arizona Posts: 147	Re: Possible intake gasket leak Great, looks like it is in the same place as the one for an older 350. My 69 blazer had it right about there. Is this the one for the gauge or ECM? Or are they one n the same. I'll go ahead and buy one in the morning and then try and throw it in on Monday or so. One last thought on it though. For future reference, look back up a few posts where I was wondering about the closed/open mode. Does anyone know exactly how that works and how it may affect my situation? Hopefully if all goes well I will post up by midday on Monday, or probably Tuesday morn to check it while it's cold. Thanks for the info. __________________ 1969 Blazer: 350/350, 4X4, HEI, Edlebrock carb/intake, dual flowmasters, np205, 3:07's and the rest is mostly stock. The front end disc swap is finally complete 2002 Z71 Tahoe. CAI, Flowmaster 40, Silverstars in high, low and fogs and a bunch of mods (upgrades) inside and out.