View Single Post
Old 02-15-2016, 10:29 AM   #53
NastyBuzzard
Registered User
 
NastyBuzzard's Avatar
 
Join Date: Oct 2013
Location: Saluda, SC
Posts: 1,275
Re: Let's Build A 1 Ton Crew Cab 4x4

Quote:
Originally Posted by y5mgisi View Post
You should be able to find a set of front hangers on eBay. Or, you can always get the super awesome B52 front hanger kit from diy4x4.com. They are awesome and cheap. Bushings can be found for cheap. You can look them up on summit or Napa or whatever. Just look up front spring bushings for something like the k30 and it should ask if it has factory or aftermarket front Springs. It's been my experience that virtually all the aftermarket front Springs use the same bushings so that should be easy. As for u bolts, off road design sells them for $10 a piece. So those aren't too bad either.
IDK if B52 kit is cheap.. I think its almost $200 shipped? I don't ever think I will do the B52 swap anyways. It is very doubtful but who knows.

I will check ebay for spring hangars again, maybe I wasn't searching the right thing before.

I should only need 3 of the u bolts, correct? I need to make sure right diameter and length though. Then I need 2 of those longer bolts for the passenger spring.

I want to get some stuff ordered this weekend.

If I had it my way it would have the front under it and be shortened this weekend.
__________________
1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF
2020 1500 Silverado 3.0 Babymax
2002 2500 Silverado- 6.6/ Allison
2010 CTS V- The "NastyBuzzard"
1979 Trans Am - Eventually getting 6.0/T56 swap with boost
NastyBuzzard is offline   Reply With Quote