|
Re: Need info/advice re pulled rocker stud and probably stuck valves
Quote:
Originally Posted by Myself
Now it won't idle?.....I swear I've been down this road. Please pull your oil filter and cut it open. Look for metal in the paper pleats. Report back.
|
This sounds ominous - and certainly will check for loose pieces if the idle problem can't be solved with carb work and zero vacuum leaks. What is the potential problem you are addressing - or, what happened in your case?
No one has spoken to the possible effect upon normal idle in the case of two non-working valves (one can dead). Any experience there?
__________________
CCCC
67 Sting Ray Coupe 327 4sp; 68 K10 Suburban 327 4sp; 69 K20 Lifted 383 4sp; 69 C80 Fire Truck 478 V6 5sp/2sp; 69 C20 Longhorn 327 4sp; 70 C30 Wrecker 350 4sp; 70 C30 Flat Bed 350 4sp; 71 C20 LWB 350 4sp; 72 K5 Blazer 350 4sp; 72 C30 Flat Bed Gooseneck Hauler with sleeper 350/TH400; 72 C20 Longhorn 402 4sp; 52 Mack LTL Supercharged Cummins 5sp x 3sp; 01 Dodge 5.9 HO Cummins 6spd; 02 Safari Trek 2430 8.1 Vortec on Workhorse Chassis; 03 Silverado 2500 HD 4wd Duramax/Allison
Moved but still in the family
70 C20 Custom Camper 350/TH350; 72 K5 Blazer CST Highlander 350/TH350
Recently sent to new homes
72 C30 MoHome 402 4sp; 72 K5 Blazer Conv 350 4sp; 75 GMC 6000 Aerial 350 w Allison; 72 GMC 3500 Utility 350 4sp; 70 GMC 3500, 350 4sp
|