Re: Camber sleeves
Yes, My 81 has offset camber sleeves on the top that were installed probably over 30 years ago by a alignment shop not long after I first bought my 81
I need to replace the steering ball joints on the pass side. Im going to check to see if the spindle is bent or notm.... I dont think it is.
I marked and reinstalled in the same offset position the offset sleeve on the drivers side when I did that side ball joints
//
__________________
'81 K20 Silverado , '99 Dodge Cummins 4x4, '05 Dodge Cummins 4x4,
Pinstriping-Lettering-Specialty Painting
|