The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

beadblaster · 06-04-2018, 01:59 PM

I am going to bring truck down for a alignment. I will get the toe in adjusted and get them to check the camber. If camber is out I will then know how many degrees and decide what to do. Moog only has camber cams that go to 1/2 degree but they have shims that mount between spindle and knuckle that go to 1 1/4. If it is out more than that you can stack them.

06-04-2018, 01:59 PM	#4
beadblaster Registered User Join Date: Oct 2016 Location: Grand forks,bc Posts: 141	Re: Camber sleeves I am going to bring truck down for a alignment. I will get the toe in adjusted and get them to check the camber. If camber is out I will then know how many degrees and decide what to do. Moog only has camber cams that go to 1/2 degree but they have shims that mount between spindle and knuckle that go to 1 1/4. If it is out more than that you can stack them.