update...
went ahead and ordered my paint and activator for the frame and suspension, also for the bottom of the bed, and under the cab. i may use it in the engine compartments as well (firewall, inner fenders etc.)
also ordered my painting supplies, sandpaper, DA sanding disks, sanding blocks, respirators, paint suit, mixing cups.
all from smartshoppersinc.com...
part num:
1 -UA-70338 Kirker Hot Rod Black 3/4 gallon
1 -UA-1600 activator 1 qt
1 -1-180 Indasa Rhynowet 9"x11" wet/dry 180 grit 50 sheets
1 -1-360 Indasa Rhynowet 9"x11" wet/dry 360 grit 50 sheets
1 -60-60 Indasa Rhynolox/Rhynodry 6" self adhesive disk 60 grit 100 disks
1 -60-80 Indasa Rhynolox/Rhynodry 6" self adhesive disk 80 grit 100 disks
1 -BG-12 Motor Guard big block sanding block
2 -SB-1 Motor Guard flexible sanding block
2 -SAS-8661-92 SAS bandit half mask disposable respirator
1 -SAS-6938C SAS moon suit paint suit
6 -1 quart mixing cups
total cost 275.00 included shipping
Monday, Tuesday, and Wednesday it is supposed to be in the 70's
Monday will get the frame/all suspension parts etc. sandblasted.
will epoxy prime, then paint it all with the Hot Rod black...can't wait to get this painting done so I can start turning bolts
