The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Sarge's rattle-can rebuild

48cj2a · 11-30-2015, 09:22 PM

Looking good and learning more and more as you work on it.

I'm working on one for my Base Commanders Friend. Did a thread on Steel Soldiers, check it out on some stuff I had to do for the firewall Resistor Pack by pass and a manual GP push button: http://www.steelsoldiers.com/showthr...Will-Not-Start

I'm about to do the filter conversion on it next but I'm going to use the WIX 24770 mount with twin in and out ports so I can incorporate a petcock for air bleeding.

Also going to do 90s on the fittings for this one.

11-30-2015, 09:22 PM	#82
48cj2a Registered User Join Date: Feb 2010 Location: Central, IL Posts: 599	Re: Sarge's rattle-can rebuild Looking good and learning more and more as you work on it. I'm working on one for my Base Commanders Friend. Did a thread on Steel Soldiers, check it out on some stuff I had to do for the firewall Resistor Pack by pass and a manual GP push button: http://www.steelsoldiers.com/showthr...Will-Not-Start I'm about to do the filter conversion on it next but I'm going to use the WIX 24770 mount with twin in and out ports so I can incorporate a petcock for air bleeding. Also going to do 90s on the fittings for this one. __________________ 03 Suburban Z71 Z71 98 GMC Yukon SLT 4x4 Yukon 86 M1009 CUCV Project Milverado 48 Willys CJ2A 48CJ2A Last edited by 48cj2a; 11-30-2015 at 09:51 PM.