Quote:
Originally Posted by Mykk
Those Vortec 350's are known for intake gasket issues, mostly due to dexcool. Felpro has a revised updated gasket for the application.
That intake gasket separates coolant and oil from air/fuel. I would first replace the intake gasket and go from there.
If your not satisfied after that, do a compression test on all cylinders (for comparative figures) and the coolant test strips.
Cheers ~Mykk
|
The gaskets are a bad design, Dexcool is not to blame for that.
Quote:
Originally Posted by Rufton
Thanks, I will look for the most expensive Felpro intake gasket.
|
Fel-Pro MS98000T are gaskets you want, I agree with Mykk....Sounds like intake gaskets.