[wpotter]

First of all I would like to thank all of the guys who tried to help me figure this out in my last post. (How do I remove rotors from 1999 K2500.

I finally got back on this project and figured out how to remove the front rotors so I could get them turned and replace the pads. This is my first 3/4 Ton 4WD Truck so its all new to me.

First remove the large center axle nut and caliper. Then you have to remove the four bolts that hold the hub assembly to the spindle and the ABS wire. Remove the complete hub and rotor assembly from the truck. Then you have to knock out all 8 lug nut studs. Once the studs are knocked out the rotor will free itself from the hub and is removed from the back of the hub, or the hub is pulled through the rotor.

For all the guys who thought you have to beat on it because it is rusted on. I dont think I could of ever beat on it hard enough to break through the hub.lol.

Thanks again and hope this will help out anyone else who needs to know how its done.