Re: S10 Swap how to
Yea I swapped a manual in mine.
I used a 327 from my '67 camaro, ditched the powerglide and found a T-5 from an '85 camaro for cheap. I fabricated linkage to keep the original shifter and repurposed a hydraulic master cylinder/ throw out bearing from a different project that didn't happen.
I used the s10 brake booster and pedal bracket. I just drilled the firewall and didn't reinforce the it. Although I attached the pedal bracket to the steering column bracket for support.
I guess I should update my build thread.
Last edited by Black93GT; 10-30-2017 at 07:37 PM.
|