Thread: Charging issues
View Single Post
Old 01-25-2018, 10:52 PM   #12
Wrenchbender Ret
Registered User
 
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,190
Re: Charging issues

Take the connecter off the regulator. Put a jumper wire from the blue wire connector to the red wire. You should get a small blue spark when you make & break the circuit. Start the engine & check the voltage. If the voltage goes up it means the alt. is good & the problem is in the reg. or wire ing.
Wrenchbender Ret is offline   Reply With Quote