Quote:
Originally Posted by 67ChevyRedneck
I've also used this stuff from eastwood. It flows very easily and has good coverage. I've thought about closing up any "leak" areas from the tailgate, pour a quart or so in, tape up the opening with some aluminum foil tape, and shake it, turn it in all directions, etc to coat the inside of the tailgate. Let it dry a few days, then do the same thing with some thinned out rust encapsulator as a top coat?
|
I wondered about doing this too. Now I'm up in the air with the other stuff from Eastwood. Guess doing both is cheaper than try to find another halfway decent tailgate not dented to crap.