The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Davids71C20 · 04-14-2014, 03:05 AM

Since I had to move the transmission forward, the clutch push rod had to be shorter also.

My original was worn pretty bad anyway so I got the parts from Napa and made a new one with a long spring bolt, Napa clutch rod kit (for the pivot block), and a few nuts and washers.

Had to re-thread the pivot block from coarse threads to fine threads.

It wasn't too hard and works great.

I also got some new headlight adjustment screws

04-14-2014, 03:05 AM	#17
Davids71C20 Registered User Join Date: Mar 2012 Location: North Pole, Alaska Posts: 27	Re: '71 Chevy C20 Blue Since I had to move the transmission forward, the clutch push rod had to be shorter also. My original was worn pretty bad anyway so I got the parts from Napa and made a new one with a long spring bolt, Napa clutch rod kit (for the pivot block), and a few nuts and washers. Had to re-thread the pivot block from coarse threads to fine threads. It wasn't too hard and works great. I also got some new headlight adjustment screws