Still plugging away. At this rate, you guys will probably have pics of every panel sanded and primed of this truck.
The previous owner "jammed" the truck in this orange color. It failed and flaked off in sheets. So lots of sanding, scrapping and grinding...
24 hours later with 2 coats of SPI epoxy. I'm using wood shims on the hood supports so that I can fill the cracks with SEM 39357 flexable urethane foam. I have to say, after using this product....not that impressed. It has a 15 sec working window and was messing to work with.
But now that all the foam is in, it is a completely different hood. No more flex or wobble. I'll spray some more primer on top once I clean up all the foam mess