The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**HO455** · 11-10-2019, 02:01 PM

This picture shows the switch and the two purple wires hooked to it. (Looking up from next to gas pedal)
Since your truck starts in all gears someone may have jumpered the switch in the past because the switch failed. The switch does not care which purple wire goes to which terminal on the starter safety switch side. The other side of the switch has the back up lights on it. (Second photo. On the door side of the column) So there are four terminals with wires hooked to the switch on the column.

Good luck

11-10-2019, 02:01 PM	#6
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 10,821	Re: 67 panel truck neutral safety This picture shows the switch and the two purple wires hooked to it. (Looking up from next to gas pedal) Since your truck starts in all gears someone may have jumpered the switch in the past because the switch failed. The switch does not care which purple wire goes to which terminal on the starter safety switch side. The other side of the switch has the back up lights on it. (Second photo. On the door side of the column) So there are four terminals with wires hooked to the switch on the column. Good luck Attached Images __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban the WMB,1991 S(stink)-10 Blazer,1969 GTO, 1970 Javelin, 1952 F2 Ford 4X4, 29 Model A, 72 Firebird. 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377