|
Re: wheel alignment for Chevy Pickup with Camaro Subframe ?
Yep, the way I see it is to measure the angle on the upper shafts on the stock Camaro. Keep that number and put the truck at the ride height it will be, "All thread" replacing the shocks and tighten them up until it's down to the right height it was on the Camaro. Using a measurement of how far the rubber bumper on the lower arm was from the frame. Set the rear at the height you want the truck to be at. THEN you weld the sub frame in. Now you go into the alignment shop and say "Align my Camaro" done deal. 
Brian
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.
"Fan of most anything that moves human beings"
|