The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 03-22-2017, 10:20 PM

Vett both the brake light wire and the head lights come off the ignition switch harness also right? They could be contacting each other in between some place. Maybe even in the plastic connector on the key switch itself. I had to replace my once due to over heating and melting of the plastic. I never did find the cause but it's never done it again since I installed the new connector.

03-22-2017, 10:20 PM	#15
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Brake warning lamp issue Vett both the brake light wire and the head lights come off the ignition switch harness also right? They could be contacting each other in between some place. Maybe even in the plastic connector on the key switch itself. I had to replace my once due to over heating and melting of the plastic. I never did find the cause but it's never done it again since I installed the new connector. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.