The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**jayoldschool** · 05-14-2014, 10:43 PM

Four bolts to remove the caps off the U joints at the rear end, two bolts and nuts to take the center bearing off the frame, then pull the shaft out of the trans. An afternoon of easy work to replace the U joints and bearing.

05-14-2014, 10:43 PM	#7
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,151	Re: driveshat removal Four bolts to remove the caps off the U joints at the rear end, two bolts and nuts to take the center bearing off the frame, then pull the shaft out of the trans. An afternoon of easy work to replace the U joints and bearing.