The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**PGSigns** · 03-02-2017, 02:28 PM

Well I would believe MMW saying they are not theirs over a previous owner. They should know if they made them. There was another company out there doing them at one time call Barley Legal. They could have come from them. You just never know if the are not in the original boxes or stamped with a name. Post some pictures and that will help. You will never get rid of 100% of the gap since the gap is what allows it to pull tight. A set a calipers will tell you if it just has to much paint or powder coat on it. On a fit like that the parts should be bare metal.
Jimmy

03-02-2017, 02:28 PM	#9
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: mmw controls on thorbros crossmember Well I would believe MMW saying they are not theirs over a previous owner. They should know if they made them. There was another company out there doing them at one time call Barley Legal. They could have come from them. You just never know if the are not in the original boxes or stamped with a name. Post some pictures and that will help. You will never get rid of 100% of the gap since the gap is what allows it to pull tight. A set a calipers will tell you if it just has to much paint or powder coat on it. On a fit like that the parts should be bare metal. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic