The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Dan in Pasadena** · 02-18-2018, 12:27 PM

I finally re-tapped the shoulder belt mount hole successfully and mounted the belt. This allowed me to install the seat for the first time since it was done.

The 5h coat of varnish went on and that seems to be enough. I wet sanded with 1500 grit to remove dust nibs and started machine polishing.

EDIT: Sorry about the dumb pictures rotating.

02-18-2018, 12:27 PM	#2461
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,331	Re: Danny Boy is BAACK! w/ '55 Big Window I finally re-tapped the shoulder belt mount hole successfully and mounted the belt. This allowed me to install the seat for the first time since it was done. The 5h coat of varnish went on and that seems to be enough. I wet sanded with 1500 grit to remove dust nibs and started machine polishing. EDIT: Sorry about the dumb pictures rotating. Attached Images __________________ '55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda! Last edited by Dan in Pasadena; 02-19-2018 at 12:26 AM.