Re: Broken bolt in front of crankshaft
How deep down is the bolt broken off? You might have enough room to stuff an aluminum (so it doesn't trash the threads) bushing in it. I think the threads are 3/8" or 7/16". You can try a couple of bolts to check that. Then get a bushing from the hardware store with a 1/4" ID and whatever the OD is. You might have to go to a 3/16" ID. This is all contingent on there being enough depth for the bushing.
__________________
~Steven
'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper
Simi Valley, CA
|