Quote:
Originally Posted by paul blair
Thanks for your input...form what information I have found some say weld the original filler neck to the new tank!? Body mount in the way!
|
The filler neck has 2 nuts and is soldered on to the tank...you can melt it off if you have a torch set-up or take it to a radiator shop...you can also get some pre-formed hoses and work it that way. That's what I did on mine.
I cut about an inch off the neck.....got some pre-formed 45º fuel filler hosed and a coupler....I made it come out in the correct place to connect to the filler tube on the body....
2 of these
https://www.fillernecksupply.com/1-3...ler-neck-hose/ and a stainless coupling...
you have to route them around in front of the body mount to be in the correct location
here's where it need to come out across the frame.
original tank with neck still on it