The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

vince1 · 07-16-2017, 12:49 PM

I ordered the 78 - 83 CJ Jeep tank P/N JP1C (25 1/4" X 18 1/4" X 11") and only 15 US gal. which I think is about the capacity of the in cab tank. There should be no frame work in the back but will have to add a fuel door through the box side. Ordered the sending unit too but will probably have to modify it for the 30 ohm fuel gauge.

87 Blazer tank as I looked it up is 28 3/4 X 28 1/8 X 10 3/4 and more capacity. The rear cross member would need to be altered with this one and I think maybe also the frame rails. I list it here because others have used it for this purpose.

07-16-2017, 12:49 PM	#12
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,164	Re: Donor vehicle for seats I ordered the 78 - 83 CJ Jeep tank P/N JP1C (25 1/4" X 18 1/4" X 11") and only 15 US gal. which I think is about the capacity of the in cab tank. There should be no frame work in the back but will have to add a fuel door through the box side. Ordered the sending unit too but will probably have to modify it for the 30 ohm fuel gauge. 87 Blazer tank as I looked it up is 28 3/4 X 28 1/8 X 10 3/4 and more capacity. The rear cross member would need to be altered with this one and I think maybe also the frame rails. I list it here because others have used it for this purpose.