View Single Post
Old 09-07-2012, 06:21 PM   #5
likaroc13
Rollin' Old Skool
 
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
Re: Project "Black Betty" (bam-A-lam)

Here's some pics of the exterior after I got her home. As you can see, it has the big back window and Custom Cab trim. The truck was originally the light blue with white top, according to the tag on the kick panel area. It was repainted red at some point and is now obviously black. It has the typical lower front fender rust, some minor bubbling at the bottom passenger door corners, minor inner rocker rust, and minor but typical rust on the front hood panel. The paint is not perfect by any means, however it's nice enough for a driver. It has the door crease on the driver's door which happens when door checks wear out causing the door to swing open too far. As for the bed, some goober did a poor job of filling in the backup light holes . It's only visible when the lighting hits it just right.






__________________
_____________________________________________
Phillip

My Build threads:
1966 Chevy C-10 "Black Betty"

shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction)
http://67-72chevytrucks.com/vboard/s...ighlight=betty

1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver)
http://67-72chevytrucks.com/vboard/s...d.php?t=601142

Pics:
'66 C-10 https://flic.kr/s/aHsjHWD4h9
'97 Tahoe https://flic.kr/s/aHsjGZ7wKP
'93 C-1500 https://flic.kr/s/aHskxdpdnQ
'88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md

Previous Rides:
1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold)
1993 Chevy C-1500 short/step Retro-Rod (Sold)
1988 S-10 Blazer 2dr/2wd mild custom (Sold)
likaroc13 is offline   Reply With Quote