Quote:
Originally Posted by MARTINSR
NeoJuice, tell me something, on that very last photo, it looks like that is as far back as the seat will go, is that right?
Because if it is, that means I don't have to section the very rear most piece of the riser that goes from side to side in the back of the cab.
It looks like the second photo it looks like that track is putting the seat back about as far as that last photo is, which means the seat doesn't go back over that rear brace that goes from side to side of in the cab, does that make sense and is that accurate that the seat doesn't go back that far?
It looks like if it did it would be hitting under the rear window before it could be over that piece that goes from side to side that the rear of the seat track bolts to.
Brian
|
Yes the seat is all the way in the rear full back position in that picture. With it all the way back the top rail of the seat frame almost touches the back wall of the truck just below the window.
IN pictures 4 & 5 you can see the frame in full back position on how close it is to the back wall.
Hope that helps.