The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

E-TN C10 · 12-07-2017, 09:18 PM

I'm not sure on the 4wd trucks but I know the 2wd trucks use two different rotor thicknesses. The 81-up trucks are 1" and the 80 and older trucks typically have 1.25" rotors if I'm not mistaken. I'm sure there are some variances ,but id look into that on the 4wd, and maybe look up part numbers for what you have on the truck now. Maybe someone with some 4wd knowledge will chime in!

12-07-2017, 09:18 PM	#2
E-TN C10 Registered User Join Date: Oct 2017 Location: Madisonville, TN Posts: 15	Re: Front caliper interoperability I'm not sure on the 4wd trucks but I know the 2wd trucks use two different rotor thicknesses. The 81-up trucks are 1" and the 80 and older trucks typically have 1.25" rotors if I'm not mistaken. I'm sure there are some variances ,but id look into that on the 4wd, and maybe look up part numbers for what you have on the truck now. Maybe someone with some 4wd knowledge will chime in!