The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 5-speed for 69 C10?

fnoblitt · 01-13-2007, 07:46 PM

i belive the camaro 5 speed will bolt up to the stock bellhousing.but the shifter may hit the seat. the s-10 5 speed would require modifacations (drill out mounting holes,trim input shaft,ect..) the trick thing to do is install the s-10 tailshaft onto the camaro trans.that way it puts the stick in the center of the floor. there is a good artical on this in stovebolt and the inlinners.com this is a cheap way to go if you drive like grandpa (the camaro trans is only good to 300hp max) if you can afford it, the tremec tko600 will bolt up and is good to 600hp. just my 2 cents

01-13-2007, 07:46 PM	#9
fnoblitt Registered User Join Date: Mar 2002 Location: southern calif.,usa Posts: 200	Re: 5-speed for 69 C10? i belive the camaro 5 speed will bolt up to the stock bellhousing.but the shifter may hit the seat. the s-10 5 speed would require modifacations (drill out mounting holes,trim input shaft,ect..) the trick thing to do is install the s-10 tailshaft onto the camaro trans.that way it puts the stick in the center of the floor. there is a good artical on this in stovebolt and the inlinners.com this is a cheap way to go if you drive like grandpa (the camaro trans is only good to 300hp max) if you can afford it, the tremec tko600 will bolt up and is good to 600hp. just my 2 cents __________________ 70 c10 stepside ,350v8, m-20 4 speed