View Single Post
Old 06-20-2017, 12:12 PM   #4
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,497
Re: Pictures of engine bay wireharness

Quote:
Originally Posted by Sturvin View Post

This is in my 69.

The fuse panel under the dash is immediately on the other side of the firewall.

The white wire on the left of mine would normally be a fiberglass wrapped resistive wire for your points style ignition coil. I repinned it with a standard 16 ga wire for HEI. The resistive wire will be spliced and run to the smaller post on your starter solenoid away from the engine.

The heavy purple wire on the left runs to the smaller post on your starter solenoid towards the engine.

The tan wire on the left runs to the brake sensor on the master cylinder or proportioning valve.

The green wire on the left is your coolant temp sensor

You may not have or need all of the wires shown on the wiring diagram. For example, I don't have an electronic oil pressure sensor, I have a mechanical gauge. So I don't have a blue wire from the wiring harness on the left.

Hopefully this helps.
Saved for reference.
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote