[rockosocko]

I have a '95 2500 2wd and found another NV4500 2wd at the pull it from a '01 2500
BUT this one has a Hydro collar and two lines for the T/O bearing, whereas
my '95 only has the external slave to push on the fork.

Will the '01 swap and will I be able to just swap out my slave, fork and bell housing.
OR will I have to fab up all sorts of stuff to make it work?

My orig is leaking pretty badly and not sure how much fluid is actually left since I flushed it last..
This '01 looks to have been rebuilt/taken apart at some point since it was pretty clean, just a bit dusty-dirty and not oil soaked dirty..

I know the shifter tower is different, but don't think that will be any problem like the T/O might be..

Thanks