okay, got the spindles bolted on and that is done, however, even after I found the correct outer tie rod ends, those were right hand thread....and when I went to install them, come to find out the tie rod coupler was the wrong thread (left hand) take in mind, I bought this truck as a "Basket Case" so when I put these tie rods together, I must have got them swapped around.
so, even after all this, the correct tie rod ends make the difference! this morning, I found the correct inner tie rods, (Moog ES403L) so I'll be picking these up after work and finishing this endeavor up. I'll post pictures of the end results here in a little while (work calls) even with the 2" lowering coils and the 3" drop spindles, it looks as if it needs to be a little lower, but I'll live with it, as I won't be able to get a decent jack under it if it were lower!!!
Have a Great Day!
Ben
