[clinebarger]

Auxiliary Valve Body/Forward Accumulator.

Remove the 3 8mm headed bolts over the Forward Accumulator assembly.
Remove Spring & Piston.
Check Piston Pin Bore for wear.
Install new seal on Fwd. Accm. Piston.
Clean Bore of all clutch material.

Check Cover and see if the Pin can pass though the hole in the center of the Cover, If it can pass through....Obtain a later style Cover OR Braze/Weld the hole shut & drill a oil relief hole elsewhere in the Cover. If the Pin was to work out, You would loose Forward & Burn the Forward Clutches.

All Aluminum Covers have a narrowed-Oval hole.
If you have a Iron Cover, Check it!!!