The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

fredhlynch2 · 06-25-2018, 09:52 AM

So,

Getting ready to drill my brake pedal for power brakes. I get drilling it one inch lower than the original brake rod hole but where on the pedal? To the front, in the center or towards the back? Seems you would get more pedal travel to the master if it the new hole was to the rear (closer to the driver) of the pedal as opposed to a front or center position?

06-25-2018, 09:52 AM	#1
fredhlynch2 Registered User Join Date: Mar 2014 Location: Fond du Lac, wi Posts: 91	Drill The Brake Pedal So, Getting ready to drill my brake pedal for power brakes. I get drilling it one inch lower than the original brake rod hole but where on the pedal? To the front, in the center or towards the back? Seems you would get more pedal travel to the master if it the new hole was to the rear (closer to the driver) of the pedal as opposed to a front or center position?