The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - To those who have clipped and lowered ther truck..

Marty Gable · 03-03-2009, 03:14 PM

yes this is obvious that it is a truck clip, most of the gm pickup clips were bolt in to the frame rails. Camaro 67-69 is the same clip as the Nova 68-74 they are narrower then the 70-80's Camaro clips and they are a front steer sub, where the early Camaro/Nova are rear steer units. I would suggest another frame and start over. 47/48 are 3 point cab mounts where the 49-early 55 are 4 point mounts such as yours. Here in Colo there are several.

03-03-2009, 03:14 PM	#7
Marty Gable Still working on the COE Join Date: Sep 2003 Location: Loveland, Colorado Posts: 71	Re: To those who have clipped and lowered ther truck.. yes this is obvious that it is a truck clip, most of the gm pickup clips were bolt in to the frame rails. Camaro 67-69 is the same clip as the Nova 68-74 they are narrower then the 70-80's Camaro clips and they are a front steer sub, where the early Camaro/Nova are rear steer units. I would suggest another frame and start over. 47/48 are 3 point cab mounts where the 49-early 55 are 4 point mounts such as yours. Here in Colo there are several. Attached Images Last edited by Marty Gable; 03-03-2009 at 03:19 PM.