The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

vince1 · 05-31-2018, 11:44 AM

I have changed the serpentine pulleys over to the V type and it is easy with the 15/16 socket and impact gun. The shafts though can be a little shorter and when you get the V pulley on the nut goes on barely flush. Also in the wrecking yards they charge extra for a separate V pulley so I figure any way I can get one without paying extra I'll take it. Portable impact guns are expensive but if I had one I'd do the swap right in the junk yard.

05-31-2018, 11:44 AM	#74
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,164	Re: Alternator question I have changed the serpentine pulleys over to the V type and it is easy with the 15/16 socket and impact gun. The shafts though can be a little shorter and when you get the V pulley on the nut goes on barely flush. Also in the wrecking yards they charge extra for a separate V pulley so I figure any way I can get one without paying extra I'll take it. Portable impact guns are expensive but if I had one I'd do the swap right in the junk yard.