Re: 1956 Chevy Pro-Street Build
Here's what I did to run my wiring from the dash to the front lights. If you look at the inner fenders, you'll see on the passenger side the (2) indentations, whereas the drivers side only has the one. I welded over the lower indentation, drilled a hole in the upper corner of the firewall large enough for the front wiring to slide thru and down to the lowest front corner of the inner fender. Then all the wiring was run under the lower radiator support to the passenger side thru a wiring loom I made. This keeps the wiring our of the weather and out of sight.
__________________
RUBBER DOWN AND HIT THE ROAD!!!
1940 Ford Dlx Coupe
1969 Mach1
Last edited by my56chevytruck; 04-07-2017 at 05:03 PM.
|