[1968_K20_4x4]

Originally Posted by jeffahart

I would pump a tube of "00" grease in there and run it for a few yards then unlock it. The double aught will liquefy when the gears mesh. It will not leak. That will put a nice coating on the gears. Bottom line, I wouldn't leave it dry. Or you can get some corn head grease cheaper. You can even run it if you are in a jam.


j

Thanks for the good advice. Where do you get "00" grease from? Im in Canada and I have never heard of it. I will call around to see if any of my local farm equipment dealers sell Corn Head grease