The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Wiring fuel pump circuit with Oil Pressure switch and relay questions

chefk85 · 04-12-2018, 07:39 PM

Hooking it up per your instructions. The purple wire that comes through the fuse block and down to the starter(originally) I will just route to the switch instead of running a new one and splicing in under the dash. Should save some work. Ill post some pictures of the final product and let you know how everything goes after i put oil in the engine and prime it.

Thanks again
Kellen

04-12-2018, 07:39 PM	#21
chefk85 Registered User Join Date: Jun 2015 Location: Bellevue, Id Posts: 173	Re: Wiring fuel pump circuit with Oil Pressure switch and relay questions Hooking it up per your instructions. The purple wire that comes through the fuse block and down to the starter(originally) I will just route to the switch instead of running a new one and splicing in under the dash. Should save some work. Ill post some pictures of the final product and let you know how everything goes after i put oil in the engine and prime it. Thanks again Kellen __________________ http://67-72chevytrucks.com/vboard/s...25#post7532025 71 Cheyenne K10. 283/Th350/NP205. 3.07s non posi. 31x10.5 Bighorns.L31 350 Vortec swap in progress. 79 Suburban K20. 350/350. 6" lift. 35x12.5 Toyos. 93 Burb K1500. 350/4l60e Parting out. 2001 Tahoe LT, 5.3, autoride, 265/75s, leather, loaded, family hauler, 243k miles!