The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - What can be said about the 4-speed New Process NV833 overdrive manual transmission?

D13 · 05-16-2015, 11:50 AM

Search on A-833 here (40+ hits) and in Engine/Drivetrain (22 hits).
Good light duty trans, not a Hemi A833, great for low torque and moderate RPM. Most are Mopar bolt pattern and will not fit into GM belhoousings. The front bearing retainer is too big for most GM bells. Shfter is unique and hard to come by, Mopar truck shifters will work if modded. 2wd and 4wd, 4wd output shafts are a different length. That's a starter.

05-16-2015, 11:50 AM	#3
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: What can be said about the 4-speed New Process NV833 overdrive manual transmissio Search on A-833 here (40+ hits) and in Engine/Drivetrain (22 hits). Good light duty trans, not a Hemi A833, great for low torque and moderate RPM. Most are Mopar bolt pattern and will not fit into GM belhoousings. The front bearing retainer is too big for most GM bells. Shfter is unique and hard to come by, Mopar truck shifters will work if modded. 2wd and 4wd, 4wd output shafts are a different length. That's a starter. __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors