The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

SimonUK · 09-29-2009, 01:37 PM

Hi folks, I found this thread while googling 12 bolt axles.

does anybody have the bearing and seal numbers so I can try and obtain them over this side of the pond.

The problem is that I fitted a 12 bolt rear to my 1009cucv and the American parts suppliers over here don't know the difference between a 10 and 12 bolt SF and 14 bolt FF. They want to know year and make of vehicle. Any modifications and they're lost.

Going by the casting mine is a 1975 12 bolt (3.08:1) but as I don't know what it came off I can't get parts. Both bearings have broken up and the seals are too badly damaged to get anything off them. I also need the pinion seal number as well.

Thanks for any help

Simon.

09-29-2009, 01:37 PM	#6
SimonUK Registered User Join Date: Sep 2009 Location: Kilwinning UK Posts: 1	Re: 12 bolt axle seal question Hi folks, I found this thread while googling 12 bolt axles. does anybody have the bearing and seal numbers so I can try and obtain them over this side of the pond. The problem is that I fitted a 12 bolt rear to my 1009cucv and the American parts suppliers over here don't know the difference between a 10 and 12 bolt SF and 14 bolt FF. They want to know year and make of vehicle. Any modifications and they're lost. Going by the casting mine is a 1975 12 bolt (3.08:1) but as I don't know what it came off I can't get parts. Both bearings have broken up and the seals are too badly damaged to get anything off them. I also need the pinion seal number as well. Thanks for any help Simon.