The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - budget beater c10 to k30 swap over build.

sweetk30 · 11-26-2018, 10:33 PM

plow pump / fluid tank / valve body / belt / hoses minus the body to plow blade are all in place and cables hooked up and joystick tested .

looking for some fittings for the hoses out of the valve body . i would like 3/8" ORB male to 3/8" orb female in a 90* fitting . this would clean up the hose setup under the hood a bit . waiting for the hydro guy to be at work tuesday he had monday off . if they dont have it then i found them on ebay . i think these are what i want . https://www.ebay.com/itm/AF-6815-06....w/172512797579

otherwise shifters up threw the floor and double check stuff and drive it .

if i am feeling good and ahead of the curve maybe the light bar goes on also .

11-26-2018, 10:33 PM	#107
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: budget beater c10 to k30 swap over build. plow pump / fluid tank / valve body / belt / hoses minus the body to plow blade are all in place and cables hooked up and joystick tested . looking for some fittings for the hoses out of the valve body . i would like 3/8" ORB male to 3/8" orb female in a 90* fitting . this would clean up the hose setup under the hood a bit . waiting for the hydro guy to be at work tuesday he had monday off . if they dont have it then i found them on ebay . i think these are what i want . https://www.ebay.com/itm/AF-6815-06....w/172512797579 otherwise shifters up threw the floor and double check stuff and drive it . if i am feeling good and ahead of the curve maybe the light bar goes on also . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.