Quote:
Originally Posted by jaros44sr
Sorry about the trans. Got a question about the heater hoses, what fittings did use for the heater box. Did you braze a fitting on, or use a compression fitting?
Exhaust looks sweet
|
Didn't expect the tranny to let go. Replaced it before the fire with Monster's racing trans. Doing a little more research yields that Monster doesn't always put out a quality product.
So, it'll come out for a rebuild by Phoenix Transmissions in the Dallas area.
Hadn't finished the heater yet. Was going to be a winter project. I just looped the inside hose from the inlet right back to the outlet. Firewall fittings are a -10AN male bulkhead to a 1/2 NPT female fitting.
http://www.summitracing.com/parts/aer-fbm2823/overview/
....then threaded in a 1/2 NPT nipple into it on the interior side.