pinion angle ,will this work
Getting spring pads welded on a Ford 9 inch for my 78 2 wheel dr. Blazer with a AOL bag set up. Current angles at ride height now are 5 -tranny 3.5 Dr.shaft 1 at pinion, all down. This has worked for over 15 years. I know this wrong but at the time when I flipped the rearend we just welded on new pads sorta even with the old pads. Now I sorts understand the pinion angles, so If I get the new pads on the 9 in. welded at 5 down and have 5 still at the tranny, will I still have 3.5 at the driveshaft. If so, this should work giving me a working angle of 1.5 at both ends. I do have room to shim the tranny. Is a454/450 hp with T. 350
|