Quote:
Originally Posted by ont_guy_38
You say there is a lot of gold in it so I,m guessing you mean metallic in the paint,thats makes it very touchy to buff without a clear coat,any wet sanding at all will cut into the metallic and you will have a big mess.If it is just a little hazy I would get some 3M finesse compound and very lightly try buffing it out,That might make it passable but hard to say without seeing it. Hope it turns out for you
|
What he said. Start with that. If you want to wet sand, try a place you can't see first and go with 2000, lots of water and make sure everything is meticulously clean. I expect you'll have a different gold color at the place you tried color sanding. Ideally, you'd want a couple of coats of clear (with nothing else in it) on top so you can color sand without any issues.