The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jkade · 10-30-2007, 08:51 PM

So, this is the second time I have read the whole thread. On the upper plate that the bag mounts to, do you use a plate or a cup? Does anything need to be modified on the spring pocket? I am going to section my crossmember 1.5", 3" drop spindles, plate on top of the bag and air ride arms. I am running a 235/40/20 on the front and wanna lay the frame. I am looking to have about a 5" ride height at the bottom of the frame. I also plan to move my crossmember foward 1" to correct the centerline of the wheel. I am also going to fab up R&P.

10-30-2007, 08:51 PM	#611
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,519	Re: Crossmember Drop So, this is the second time I have read the whole thread. On the upper plate that the bag mounts to, do you use a plate or a cup? Does anything need to be modified on the spring pocket? I am going to section my crossmember 1.5", 3" drop spindles, plate on top of the bag and air ride arms. I am running a 235/40/20 on the front and wanna lay the frame. I am looking to have about a 5" ride height at the bottom of the frame. I also plan to move my crossmember foward 1" to correct the centerline of the wheel. I am also going to fab up R&P.