[tobiahr]

another weekend update. had to rebuild the front end (replace the rod end, bushings, etc.) so I decided to do a full clean and spray a little paint at the same time. got the upper control arms disassembled, cleaned and painted. forgot to take the clean pics but I can get those on the lower control arms or many of the remaining. also cleaned and sprayed the two front sway bars I have collected. need to decide which one to install once the Blazer is back on its feet and would welcome opinions. There will also be a factory sway bar from a c-30 installed on the rear before she hits the street. There is a significant difference in size between the two as can be seen in the pictures. the larger is about 1 1/4 inches (~32 mm) and the smaller is 1 5/32 (~29 mm) while the rear is 1 1/16 (~27 mm)