|
Re: C20 to K20 Conversion "Simply Toxic"
Ended up taking the cab and dog house back off the frame this weekend. Tried doing the frame plating on a creeper but couldn't do it laying on my side. Since the cabs off I'm going to leave it off until the front suspension is completely welded. Measured the frame in a few spots found its is just a little bigger then 3/16 thick. Found some steel for free at a buddy's house that was the right width and thickness, found enough to be able to box the entire frame like I'm wanting to. For now, I'm just boxing the front section, from the front clip to the rear cab mounts. I'll do the rest once the bed has its mounts and is off getting metal work done.
Now that the frame is boxed, I'm able to put the 4-link mounts on the frame and start making the links.
|