Thread: TAC connector
View Single Post
Old 10-11-2023, 04:57 PM   #3
Ramiro0727
Registered User
 
Join Date: Oct 2016
Location: Porterville, CA
Posts: 219
Re: TAC connector

Quote:
Originally Posted by Jason Banks View Post
I would highly recommend you buy this book:
https://www.amazon.com/dp/1613257015/

It has detailed drawings of all the wiring and connectors. It should tell you where every wire goes.

You used to be able to view most of the book on Google Books, but they have now limited it...or may be that's just for me, since I have looked at it so much. Here's link https://www.google.com/books/edition...0/UJdwEAAAQBAJ
Thanks Jason for the link. Well.i was troubleshooting the pink wire correctly. In my harness the wire is red. If I wiggle the wire around I get 12 volts. As soon as a stop I lose the voltage. So I figured the terminal on the wire. Going to replaced that teeminal.on that wire. To see if that helps. But according some of the wire colors don't match the colors there supposed to be. Once I fix that wire. Hopefully I can the see if the correct wires have 5 volt reference. So we can get the gas pedal working.

Ramiro
Ramiro0727 is offline   Reply With Quote