[bwood]

Sell the manual to cover the costs of the auto. To go manual you're going to need:

-Clutch Pedal Assy
-Clutch master cyl
-Clutch master cyl hose
-Clutch kit
-Slave Cylinder (if not integral to trans already)
-Install Pilot bearing in crank
-Cut hole in floor and aquire a shifter boot
-Verify that your seat will work with a manual
-Change your PCM out for a manual trans ECM
-These trucks didn't come from the factory with a 4 speed, you may not have a -place for a VSS in the tail shaft housing
-Verify that your driveshaft will work
-Install a clutch pedal switch
-The steering colums are different, IDK how well the auto column will work or whats required to get it to work