|
Re: S10 Frame Swap on 47-53 - Would you do it again?
to Nick R 23, I am getting close to driving my S10 swap project, and I would definitely do another.
the upgrade in steering and suspension is a proven GM design built right into the S10 frame, you can't beat that.
Don't get hung up on the cab mounts, I made mine from 4x6 steel tubes in an afternoon with cutting/grinding disks on my 4 1/2 inch grinder..... you don't need a kit with all the info that this website provides.
If you have a welder, and basic fab skills (that is about all I have) you will be fine.
My only concern is the use of the wheel spacers, but it seems like a lot of guys use them,so they must work.
Good Luck with whatever you decide.
|