Quote:
Originally Posted by GBCustoms
Hey Guys, I have a 66 Gmc Burb that i used a 77 c10 donor for the conversion. Aftermarket 2" drop spindle 6 lug. I am having an issue with my turning radius. I am hitting the spindle stop to the left, but turning right stops way short. its like the steering box is maxed out and wont turn any further to the right. Any Ideas?
|
I had that problem. Had to cut 1" off the left tie rod to get it right. Basically line up the pitman arm with the box and adjust your toe from there. To get it close you can use a tape measure on the front and back of the wheels. Just use the same tire groove in the front and back. This will at least let you get it to the alignment shop.